HDC-UHD Series Command Guide
23
@GOA / @SOA
HDBaseT output long reach mode
Getting
Command @GOA
Response @GOA, mode_2 ,
･･･
, mode_5
Setting
Command @SOA, out_2, mode_2 (, out_3, mode_3
･･･
)
Response @SOA, out_2, mode_2 (, out_3, mode_3
･･･
)
Parameter
mode_2-5: Long reach mode
0 = OFF [Default], 1 = ON
out_2-5: HDBaseT output channel
0 = All HDBaseT outputs (OUT2 to OUT5), 2 to 5 = OUT2 to OUT5
Getting
example
Command
Response
@GOA
@GOA,0,0,0,0
Description Getting the HDBaseT output long reach mode
OUT2 to OUT5: OFF
Setting
example
Command
Response
@SOA,0,0
@SOA,0,0
Description Disabling OUT2 to OUT5’s long reach mode
Completed
Remarks
If this menu is set to “ON”, resolutions only up to 1080p (24 bit) or dot clock
148 MHz are supported. If it exceeds those limits, signal cannot be sent.
@GDN / @SDN
Downconversion output
Getting
Command @GDN
Response @GDN, down_1
Setting
Command @SDN, out_1, down_1
Response @SDN, out_1, down_1
Parameter
down_1: Downconversion output
0 = FOLLOW SINK EDID [Default], 1 = OFF, 2 = 1080p
out_1: Output channel
1 = OUT1 [Fixed]
Getting
example
Command
Response
@GDN
@GDN,0
Description Getting the downconversion output
OUT1: FOLLOW SINK EDID
Setting
example
Command
Response
@SDN,1,0
@SDN,1,0
Description Setting the downconversion output of OUT1 to FOLLOW SINK EDID
Completed
Remarks
－
