Idis TR-1508, Руководство по эксплуатации

Страница: 34 / 55

Part 2 - Configuration
34
Event Setup
Refer to the
Menu Use on page 19
for basic
information on using the Setup menus.
Motion
• No. : Select which cameras to apply Motion Detection
to.
•
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
•
Zone
: Define the motion detection block.
You can use the mouse to drag the zone and then select,
clear, or reverse the selection.
Right-click on the mouse to open up the Zone Setup
menu.
–
Select
: Confirm the block selection in the selection
window.
–
Clear
: Clear the block selection in the selection
window.
– Reverse : Clear the blocks selected within the
selection window and select all unselected blocks
within the selection window.
– Select All : Select all blocks.
–
Clear All
: Clear all block selections.
– Reverse All : Clear all selected blocks within the
screen and select all unselected blocks within the
screen.
– OK : Save the changes and exit the menu.
–
Cancel
: Exit the menu without saving the changes.
•
Min. Blocks
: Motion needs to be detected in more
than the specified number of blocks in order to
trigger a Motion Detection event. You may select a
value between 1 and the number of blocks selected
under
Zone
for daytime and nighttime, each.