Part 2 - Configuration
82
●
Line Delimiter
: Designate a string to mark the end of
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
●
Ignore String
: Specify a string to ignore from
transaction records.
●
Case Sensitive
: Ignores case in strings designated
under
Transaction Start
,
Transaction End
,
Line
Delimiter
, and
Ignore String
.
Case Sensitive
does not apply to control strings.
●
Time Out
: Once
Time Out
has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specified duration of time.
Select between 5 secs and 15 mins.
•
If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
●
Title
: Designate a name for the text-in device.
●
Actions
: Specify which actions to take when text-in is
detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset position
when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor when
an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
–
VA Box
A list of events that occur on VA Box.
VA Box_Exceed Occupancy Limit
Event occurs when the In/Out coefficient is detected and
the coefficient of the relevant VA Box channel is added in
real time to exceed the specified conditions.
●
Setup :
Set the
Exceed Occupancy Limit event.
-
Max People :
An event occurs when a person in
the area in excess of the number of people set by a
person.
To use the Exceed Occupancy Limit function,
DV-1304's People Counting with Main should be
set on the channel.
