Part 2 - Configuration
106
Callback
Configure Callback settings.
Enter the title and IP address of the receiving server and
set
Retry
to between 1 and 10 in case of connection
failure.
Select the Setup... button at the lower right corner of the
screen to configure Callback Retry Policy.
●
Short-Term Retry Policy
: Configure short-term policy
to retry a callback event.
–
Retry:
Number of times to retry a callback event.
–
Dwell:
Wait time (in seconds) between retry
attempts
●
Long-Term Retry Policy
–
Use:
Configure long-term policy to retry a callback
event.
–
Retry:
Number of times to retry a callback event.
–
Dwell:
Wait time (in minutes) between retry
attempts
–
Check Interval:
Interval time (in minutes) to check
failover.
In a general wired network communication
environment, not a wireless (mobile) /
satellite communication environment where
communications failures are frequent, long-term
retry policies (LTRPs) are not required, except for
particular cases.
●
Max. Queue Size
: Determine the maximum number
that can be processing events. You can limit from 300
to 1000 queues. For more information on Callback
Retry Policy, refer to the graph below.
