Part 2 - Configuration
49
tour sequence.
–
Dwell Time (sec.)
: Specify how long to perform the
selected function for.
–
Speed
: Specify the preset speed.
●
Test
: Select a tour profile and then click Test to test it.
●
Edit
: Used to edit the selected tour profile.
●
Remove
: Used to remove the selected tour profile.
Select
Apply
after setting up a preset, scan, pattern, or
tour profile to see images from the concerned camera
on the left side of the screen. Selecting
Apply
or
OK
displays a popup screen that indicates whether the
profile has been set up successfully.
5
PTZ Reset:
Reboots the camera’s panning / tilting
and zoom settings.
6
Home Position
: Specify the camera’s home position.
●
Default
: Uses the factory-default position as the
camera’s home position.
●
Custom
: Uses the user-defined position as the
home position.
●
Select
Set
to change the home position.
7
Auto Run
: Specify which action to take if the camera
has not been controlled for the specified duration of
time.
8
Auto Pan
: Specify the camera’s panning direction.
When Auto Pan is selected from a remote program,
the camera pans in the direction selected here.
9
Auto Flip
: Automatically flips the image when the
camera tilts past 90° to prevent the objects from
appearing upside down.
●
Digital
: Flips the image left to right or top to
bottom.
●
Mechanical
: Automatically pans or tilts the
camera.
●
Off
: Disables Auto Flip.
0
Tilt-Range
: Specify the camera’s tilting range.
!
Restore
: Specify whether to restore the camera
to its last position or function. Enabling this option
restores the camera to its last position or function
after being restarted.
@
Wiper
: Operate the wipers connected to the camera
(stop after three round trips).
#
Periodic Moving:
Operate the PTZ camera at each
operation cycle for the specified schedule period.
