Idis DC-D4212R, Руководство по эксплуатации

Страница: 29 / 40

Part 1 - Remote Setup
29
Motion Detection
Select
Motion Detection
to configure motion detection
event settings. With motion detection event enabled,
motion detections within the designated area will be
assumed as events.
• Sensitivity : Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
• Minimum Blocks for Detection : Select minimum
blocks for daytime and nighttime motion detection.
Motion must take place over the selected number
of blocks in order for it to be considered as a motion
detection event.
•
Motion Zone
: Click
Setup
and define the motion
zone using blocks.
-
(Select)/ (Unselect)
: Enable/disable motion
detection blocks.
- (Single Block) : Select/unselect motion detection
blocks individually.
- (Zone) : Select/unselect multiple motion
detection blocks.
-
(All)
: Select/unselect all motion detection blocks.
• Motion Ignoring Interval : With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
•
Daytime
: Specify when daytime starts and ends. All
other times will be assumed as nighttime.
•
Event Action
: Select a motion detection event alert
action.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
- FTP Upload : Select this option if you wish to
upload images to the FTP server
Event Action
settings must be configured correctly
in order to perform event actions.