Idexx SediVue Dx, Руководство оператора

Страница: 32 / 36

32
Installation, service, and repair must be performed by personnel authorized and trained by IDEXX
Laboratories only.
Line voltage for the SediVue Dx AC power cable is 100–240 V AC, 50–60 Hz. Be sure to plug all
equipment into properly grounded electrical outlets.
Use only the AC power cable supplied.
Disconnect the AC power cable from the wall outlet if the:
• AC power cable becomes frayed or otherwise damaged.
• AC power adapter is exposed to water or other liquids.
Care of the analyzer
Use powder-free latex or nitrile gloves when operating or cleaning the analyzer.
Keep analyzer away from sources of heat or flames.
PROTECT your equipment from damp conditions, wet weather, or liquid spills.
Take care not to spill water or other liquids on the unit.
DO NOT use solvents, ink markers, sprays containing volatile liquids, or polish on the analyzer as it
may damage the outer case.
Clean only with mild soap and a slightly moist cloth and only when the analyzer is not in use.
Biohazard precautions
All components of the analyzer may come into contact with urine and are therefore possible
sources of infection. Urine specimens should be handled at Biosafety Level 2.
Be sure to wear appropriate protective equipment, including but not limited to eye protection with
side shields, fluid-resistant lab coat, and approved lab gloves.
Operator qualification
Operators are required to have a sound knowledge of relevant guidelines and standards as well as
the information and procedures contained in this Operator’s Guide.
Follow good laboratory practices, especially when working with biohazardous material.
Appendices