Safety
X-Smart Pro
V 2.0
6
2
Safety
Read the manual before you install or use the machine. Failure to do so can result in personal
injury, death or property damage.
2.1
Intended use
The machine is designed to dispense colorants into a can. Any other use of the machine is strictly
forbidden.
Fast & Fluid Management B.V. will not accept any responsibility in case of modifications to machines and/
or accessories.
2.2
Liability
2.2.1
General liability
Fast & Fluid Management B.V. is not liable if you do not follow the rules below:
-
The machine is for indoors use only.
-
This machine may only be used for commercial settings. The machine is not a household appliance.
-
Observe all local safety regulations.
-
Mind the minimal requirement of the building structure of the load capacity of the floor.
-
Place the machine in a well-lit and well-ventilated room.
-
Install and connect the machine according to the instructions in this manual.
-
Connect the machine to a grounded wall socket.
-
Do not use extension cords of inadequately rated power cables.
-
Make sure that the power cable is freely accessible.
-
Do not place objects on top of the machine.
-
Do not use a damaged machine. When you have doubts, contact your supplier. See
page 19.
-
Keep the machine in good condition. Make sure that defective parts are immediately replaced.
-
Replace parts only with original Fast & Fluid Management B.V. spare parts.
All maintenance beyond the scope of this manual must be carried out by a qualified service technician that
Fast & Fluid Management B.V. has trained and certified.
2.2.2
Machine-specific liability
This machine is designed to dispense colorants into a can in non-hazardous conditions.
Please consult the health & safety officer of your paint supplier and/or colorant supplier on how to avoid
the emergency of hazardous situations like personal harm or the risk for fire and explosions.
-
Personal harm should be avoided by strictly following the materials safety data sheets (MSDS) for
colorants, (base) paint and brush liquids.