BLENDORAMA III
21
5
Troubleshooting
Note
For all error messages on the computer: see the
help topic in the dispense software.
5.1
General troubleshooting procedure
1. Try to solve the problem with the information in this manual.
See
§ 5.3
.
2. If it is not possible to solve the problem with the information
in this manual, contact service. See
§ 5.2
.
5.2
Contact service
1. Find the type plate on the plate next to the emergency stop
switch. See
§ 3.1.4
.
2. Take a note of the model number and the serial number of
the machine.
3. Contact your supplier or manufacturer.
See
www.fast-fluid.com
(Fast & Fluid Management Europe
and Asia) or
www.fluidman.com
(Fluid management,
U.S.A.).
5.3
Troubleshooting guide
Problem
Possible cause
Possible solution
Main power supply is
present but the machine
does not work.
The emergency stop switch is
active.
Reset the emergency stop switch.
See
§ 3.2.3
.
The machine has a failure
and does not respond
correctly to the request from
the dispense software.
The failure could be mechanically
or electronically.
Push the emergency stop switch to reset
the machine. Reset the emergency stop
switch. See
§ 3.2.3
.
If the machine still has a failure, contact
service. See
§ 5.2
.
Содержание Blendorama III Series
Страница 1: ...Original Manual of www fluidman com V 1 0 www fast fluid com...
Страница 24: ...6 7 Electrical diagram 244...