Idex Blendorama III Series, Руководство пользователя

Страница: 15 / 25

BLENDORAMA III
15
3.3.5 Refilling a canister
WARNING
Check the material safety data sheet (MSDS) of the colorants for the personal protection
measures that are required for handling the colorant.
CAUTION
Make sure that the colorant level in the canister is correct. If a canister is empty, it can cause an
inaccurate dispensing and/or a recipe fault.
Note
The dispense software checks the level of colorant in each canister. The dispense software shows
when you need to refill a canister.
1. In the dispense software, start the fill canister command.
Note
The fill canister command of the dispense software
controls the motor of the turntable. The turntable
turns the empty canister to the front.
2. Remove the lid (A) from the canister.
3. Follow the instructions on the display.
4. Add the correct colorant (B). Do not spill. Use an Blendorama
paper funnel (C), which is provided in the Blendorama
Maintenance Kit.
CAUTION
Do not fill the canister to the brim. Leave at least
2.5 cm (1 inch) unfilled.
CAUTION
Do not pour the colorant on the agitator.
5. Place the lid back on the canister.