Identive CLOUD 47x0 F, Справочное руководство

Страница: 74 / 98

CLOUD 47
X
0 F R
EFERENCE
M
ANUAL
74
6.3.4.17. CNTLESS_P2P_INITIATOR_TRANCEIVE
This Escape command is used to send data to a target device. Prior to using this command, the
device
should have been successfully switched to initiator mode using
CNTLESS_P2P_SWITCH_MODES (E9) .
Input:
Offset Description Detailed description
0 0xE7 Initiator transceive
1 0x00 RFU
2 0x00 RFU
3 0x00 RFU
4
0
– No Chaining
1
– Chaining
Chaining
5
-- Timeout Low Byte
6
-- Timeout High Byte
Offset 7 to
7+N
N bytes of data Bytes to be sent to target device
Output:
On successful reception of data from the target, the entire data would be available from offset
0x04. Presence of additional data is indicated by the chaining byte.
Offset Description Detailed description
0 RFU
1 RFU
2 RFU
3 0
– No Chaining
1
– Chaining
Chaining
Offset 4 to
offset 4+N
N data bytes Bytes Received.