Operating Instructions
IDEM Safety Switches
NET-BOX-CS
102638 2305 NET-BOX-CS Operating Instructions
9
Factory reset
Please consult the instruction manual of the application control software or for further assistance please
contact
Functional Tests
Once the device has been installed and setup within the EtherNet IP / CIP Safety application control
software the following checks are necessary to ensure correct operation of the system.
•
Secure mounting of NET-BOX with lid screws correctly tightened.
•
Confirm correct operation of each safety input device including the lid mounted E-Stop (if fitted).
•
Expected operation of all control circuits.
6
Data Map
See technical datasheet supplied with product. For assistance please contact:
[email protected]