10
t
FIRST USE
SPECIAL SAFETy INSTRUCTIONS
1. Parts of the device become very hot during use. Use well-isolated kitchen mitts or potholders
to touch the device.
2. Never reach into the toast slot during use to remove bread.
Risk of burning!
3. Never use the toaster if it or the power cable are damaged.
4. Unplug the device when it is not in use.
REMOVING PRODUCTION RESIDUE
Heat the device without bread once at level 3 and then twice at level 7 to remove any production
residue. Make sure the room is sufficiently ventilated (i.e. open window). Some odors may occur
during this first heating. This is both harmless and brief.
NORMAL TOASTING
1. Fully unravel the power cable from the cord wrap (12) and push it into the cable slot (13).
Connect the power plug (9) to a suitable power outlet.
2. Place one slice of toast horizontally into each toaster slot (3).
3. Set the browning control (10) to the desired level between 1 – 7. For first use, we
recommend toasting at level 3. Level 1 is the lightest and level 7 the darkest browning.
Please note that different types of bread may brown differently. It is therefore recommended
to try several different levels until you achieve the optimal browning.
4. Push the power lever (5) down until it clicks into place. Toasting begins. The power indicator
on the
STOP
button (6) lights up during toasting.
Note:
- The power lever can not be pushed down while the device it not connected to the power
supply.
- To toast just one slice of bread, choose a lower browning level. Please note that in the
case of uninterrupted use, toast will become increasingly darker at the same browning
level due to the device absorbing heat. Let the toaster cool down for ca. 20 seconds so
that the built-in thermostat can reset.
5. You can adjust the browning level during toasting, should you notice that the setting is too
light or too dark.
6. After the set browning level is reached, the device turns off automatically. The power lever
pops up after the device turns off. The power indicator on the
STOP
button goes out. The
slices of toast can now be lifted from the top of the toaster.
Caution!
Exercise caution when removing slices of toast, as both the metal parts and the
bread itself may become very hot.
7. Push the
STOP
button to interrupt toasting. The power lever pops up and the slices of toast
can be removed.
8. Remove the plug from the power outlet when the device is no longer in use.
KT-212E Toaster-6L_P130162_050832013.indd 10
05/08/2013 2:27 PM
