6
Reset
• Pressing the F3 button while the
Ο
indicates row M1 acti-
vates the reset function.
• The reset button clears all stored data points, and resets the
High and low limits, and REF value to the default settings.
Auto Hold
• Pressing the F4 button while the
Ο
indicates row M1 acti-
vates the auto hold function.
• The auto hold function is activated when a stable reading is
achieved.
• The meter will beep when the meter captures the value in
auto hold.
• The held value will be displayed in the secondary display
with the annunciator.
• Pressing the F4 button while in auto hold mode returns the
unit to active measurements.
Max, Min, Max-Min
• Pressing the F1, F2 or F3 button while the
Ο
indicates row
M2 activates these functions.
• The maximum, minimum and maximum-minimum values
are displayed in the secondary display when these functions
are activated.
• These values are the most recent values, and cleared by the
reset function.
Peak Hold
• Pressing the F4 button while the
Ο
indicates row M2 acti-
vates the peak hold function.
• In peak hold mode, pressing F1, F2 or F3 will display the
peak hold maximum, minimum and maximum-minimum
values.
• The beeper sounds when new minimum or maximum values
are detected.
• Pressing the F4 button while in peak hold mode returns the
unit to active measurements.
AH
ND 2352-1 61-633 630 Series Ins 12/22/04 9:49 AM Page 6
