5
LCD Menu Function Buttons
• Use the
Ο
button to select the row of the function menu.
The rows number is labeled on the right hand side. The
active row is marked with a
Ο
indicator on the left end of
the line.
• Use the F1, F2, F3 and F4 buttons to select the column of
the function menu. The selected menu function will be out-
lined with a .
• The Menu Function Indicator will appear in Recall, Setup,
Setting, High or Low modes. When this is displayed, the
Light, Bar, Digit and Range buttons will be changed to
increase (+), decrease (-), left shift ( ) and right shift ( )
functions.
• Operating results obtained in the various menu functions
which are not stored in memory will be lost when the meter
is taken out of the menu function and returned to active
measurements.
Store
• Pressing the F1 button while the
Ο
indicates row M1 acti-
vates the store function.
• Up to seven data points can be stored.
• Pressing F1 will store the first data point.
• Pressing F1 again will store the second data point, etc.
• The captured data will be displayed in the secondary dis-
play.
• The data points stored in memory will be cleared when
changing ranges, or the measurement on the rotary function
switch.
Recall
• Pressing the F2 button while the
Ο
indicates row M1 acti-
vates the recall function.
• While in recall mode, the and buttons will scroll
through the stored data points.
• Stored data will be displayed on the secondary display.
• Pressing the F2 button while in recall mode returns the unit
to active measurements.
➔
➔
➔
➔
ND 2352-1 61-633 630 Series Ins 12/22/04 9:49 AM Page 5
