manualshive.com logo in svg

IDEAL he15, Установка и обслуживание, Страница: 33 / 60

Поделиться
Скачать
IDEAL he15 Скачать руководство пользователя страница 33

33

mexico HE 

- 

Installation & Servicing

Servicing

45  BOILER  sEALINg pANEL 

REMOVAL

1.

  To remove the sealing panel remove the 4 screws.

2. 

Remove the panel.

mxhe7614

1

2

4

3

mxhe7747

46  FAN AND VENTURI AssEMBLy 

REMOVAL AND CLEANINg

1.

  Undo the gas pipe union connection to the injector 

housing.

2. 

Undo the screw on the fan mounting bracket.

3.

  Lift off the fan and venturi assembly.

4.

  Disconnect the electrical leads from the fan.

5.

  Inspect the injector for blockage or damage.

47  BURNER REMOVAL AND CLEANINg

1.

  Remove the 6 fixings securing the burner 

(the 3 screws at the rear are extended to 

ease access).

2.

  Lift off the burner from the combustion 

chamber.

IMpORTANT

 

The burner head is a ceramic plaque 

construction. Care must be taken to 

ensure that

 the burner is not placed 

down upon its face 

as this may cause 

damage to the ceramic.

3.

  Brush off any deposits that may be on the 

ceramic with a SOFT brush.

4.

  Inspect the sealing gasket around 

the burner and combustion chamber 

insulation for any signs of damage. 

Replace as necessary.

Note.

Take care not to disturb the ionisation probes 

at the front and rear of the combustion 

chamber.

nm740

0

Ionisation

Probes

1

2

4

mexico hE 24 shown

s

ER

VICIN

g

Содержание he15





























































Отзывы:

Нет отзывов