IDEAL Falcon GTE 4, Руководство по установке и обслуживанию

Страница: 17 / 32

17 Falcon GTE -
Installation & Servicing
INSTALLATION
FAL5836
1
FAL5837
2
3
6
1
2
3
25 INSTALLING THE SENSORS (AND REAR CROSSBAR)
1. Put the sensors in
place in the sensor
pocket.
2. Slide the spirap along
the leads.
3. Loop the leads over and
secure with the spring clip.
4. pass the wires under the control panel.
5. Open the casing package and take out the
rear crossbar.
6. Secure the crossbar to the rear section on
the outside of the lugs with two M8 screws
and 2 serrated washers.
26 INSTALLING THE INSULATING MATERIAL
1. Place the insulating material under one side of the boiler with the
black fabric facing downwards.
2. Lift the insulating material around the body and fix it with two straps.
3. Put one strap on the front, underneath the control panel and the other
at the middle of the remaining part.
INST
ALLA
TION