- 18 -
C
A
B
A
C
S
False clamp plate:
A clamp plate (
A
) is fitted to the machine to
prevent pressure marks on sensitive material.
To dismount:
• Remove the clamp plate (
A
) by turning the
screwdriver (found in tool box) in the space
between the clamp and clamp plate.
• Store the clamp plate in the provided holder
(
B
).
The remaining cut, without false clamp,
is 20 mm
Warning!
Make sure the false clamp is in the
provided holder otherwise the
measurement from 20 mm - 90 mm
cannot be cut.
To mount:
• The clamp plate (
A
) is inserted to the top
into the clamp (
C
).
The remaining cut, with false clamp,
is 90 mm
•
Operation
•
Airtable:
It is easier to position large stacks of paper
when the airtable
I
is
switched on.
Setting clamping pressure:
The clamp pressure can be adjusted using
the adjustment knob
G
. The
clamping pressure can be
read on the light panel
S
.
