IDEAL 222142, Руководство по установке

Страница: 14 / 16

COMMISSIONING CHECKLIST
When the Halo is set up use this commissioning checklist to check and complete the install.
Description Confirmed
Use the “Identify” function to confirm successful pairing has
taken place. Short press on the Pair button on the Smart
Interface. Press Pair button again to exit “Identify” function.
Zigbee LED on Smart Interface
flashes green
Halo home screen flashes to
indicate successful pairing
Halo is positioned in the homeowners chosen location if desk mounted.
Check RSSI (Received Signal Strength Indication) of the
Zigbee wireless connection via support page on the PRT
(access via the menu).
Target RSSI between 0 and -65
and text green
Check RSSI (Received Signal Strength Indication) of the
Zigbee wireless connection and the Wi-Fi connection via the
support information in the Halo app.
Target RSSI between 0 and -65
and text green
On the Halo set the mode to AUTO then increase the
temperature to 30°C (repeat using Halo app).
Flame ON
Boiler ON
Boiler LED on Smart Interface
ON (Green)
On the Halo set the mode to AUTO then decrease the
temperature to 5°C (repeat using Halo app).
Flame OFF
Boiler OFF
Boiler LED on Smart Interface
OFF
Check the Smart Interface indication is correct.
Power LED green
Zigbee LED green
Connectivity LED green
Full battery level indication on Halo home screen.