www.ideal-tek.com
Switzerland
4
1. USE WITH A MONITOR
Remote control
Use the remote control when the device is connected to the monitor.
Z+
Zoom in (+)
Z-
Zoom out (-)
4
Increase brightness
3
Decrease brightness
Press
MODE
shortly and autofocus will go off / on. When autofocus is off,
3
&
4
will adjust focus manually.
OK
changes magnification to wide angle and shows an artificial laser cross. Press
OK
again to exit and go back
to previous magnification.
Press
MODE
for 5 seconds and a menu will appear with more choices (user or service). Press
OK
for more option
and settings:
•
Language
•
Camera Resolution
•
Brightness / Contrast
• etc.
FUNC
changes between color and greyscale. Press
MODE
again to exit.
Remote control pairing
Hold the remote control on the back of the TEK-SCOPE while the power is on, then press the OK button on the
remote control for 5 seconds. When a red light start flashing, the pairing procedure is complete.
Note: The remote control inside the package is paired by the Factory. Changing batteries or using remote with
more than one device may require additional pairing.
