9
2,5
2,5
10
10
11
min.
10 Nm
9.
Refit the shower rail assembly back onto the nipple on
the shower valve. Align the bracket on shower rail to the
circular bracket fitted to the wall. Press firmly to ensure the
bracket on the shower rail makes contact with the wall.
Using a 2.5mm hexagonal key, tighten the grub screw on
the top of the bracket to secure the riser rail assembly at
the top.
10.
One side of the flexible shower hose can be
screwed onto the outlet nipple on the underside of
the shower valve. The other side can be screwed
onto the shower handset.
The flexible shower hose has integral seals at both
ends.
The shower handset can be parked in the bracket
using the conical portion of the shower hose, as
shown.
The shower parking bracket height can be adjusted:
• Use the knob to unlock the bracket from the riser
rail.
• Slide the bracket up & down along the riser rail to
the desired position, then relock it with the knob.
At the bottom of the riser rail, tighten
a second grub screw into the nipple
(that was on top of the shower valve).
11.
Finally, the overhead shower plate can
be screwed onto the end of the shower rail.
Observe the 10Nm torque shown, but do
not use excessive force.
Operate the fitting, check all joints for leaks.
Rotate the diverter handle & check both
shower outlets.
14
