LanXPLORER Pro
150835 Iss 5
User Manual
Page 50
6.15
Wi-Fi
With this test the LanXPLORER can test wireless networks within reception range. An
overview the tests available is given in Chapter 4.
1.
Select the menu "Ports" "Wi-Fi".
2.
Select Scan to start recognition of the networks.
6.15.1
Connecting to a network
3.
Select a network with which you want make a
connection.
4.
Select Join in order to connect with the
network selected.
5.
Confirm the screen message with OK if you
want to configure the network.
The device detects and sets the coding type automatically.
6.
Select the menu point
Code
.
7.
Enter the network code with the alphanumeric
keys.
8.
Save the entry made with OK. You can exit
the menu without saving the changes with
Cancel or Escape.
9.
Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
10.
In the option
Code type
, set ASCII or HEX.
NOTE:
The information required for setting the network has to be requested from your system
administrator.
If a Default Access Point has been saved in the LanXPLORER, when activated, the device connects
to the Wi-Fi function automatically using this Access Point.
11.
Select Apply in order to take over the settings.
12.
Select Join in order to connect with the network.
13.
Confirm the screen message with OK.
The SSID of the network with which you are connected will be displayed in bold and
underlined.
14.
Select Save to store all test results in the current job.
15.
Select Details to view further information on individual networks.
Figure 71: Wi-Fi Scan
Содержание LanXPLORER Pro
Страница 1: ...LanXPLORER Pro ...
Страница 64: ......
