IDEAL Networks LanXPLORER Pro Скачать руководство пользователя страница 44

Страница: 44 / 64

LanXPLORER Pro

150835 Iss 5

User Manual

Page 43

6.6

Verify

This test allows a Netmap already saved to be compared with the current Netmap.

6.6.1

Performing test

Select Setup to select the Netmap already saved for comparison.

Select the file to be compared and confirm your selection with Apply.

NOTE:

The name of the file selected for comparison then appears in the menu window at the top right.

Select Run to start the comparison test.

The LanXPLORER then displays a comparison list for the

current Netmap and the saved Netmap.

Image

Description

same

The same host was recognized in the

comparison file and the current Netmap.

diff

The host is new in the current Netmap or the

host is not present in the current Netmap

6.6.2

Saving Netmap for comparisons - Verify

The current device list can be saved in the instrument and used for comparison with new

tests (see 6.5.2).

6.6.3

Display results

SHOW COMPARISON LIST

It is possible to view the test details on the comparison test.

Changed Hosts

New Hosts

Missing Hosts

Select the desired option to display a host overview.

VIEW TEST DETAILS

It is possible to view the test details on the individual hosts.

•

IP address;

•

MAC address;

•

Services;

•

Station name.

Select the desired option to display

a host overview.

Mark and ENTER the host for which

you want to view more details.

Select the Details.

Figure 61: Verify - Comparison

overview

Figure 62: Verify - Host List

Содержание LanXPLORER Pro

































































Результаты поиска

Содержание LanXPLORER Pro

Отзывы:

Похожие инструкции для LanXPLORER Pro

Бренды по названию

Популярные бренды

IDEAL Networks LanXPLORER Pro, Руководство пользователя

Результаты поиска

Содержание LanXPLORER Pro

Отзывы:

Похожие инструкции для LanXPLORER Pro

Бренды по названию

Популярные бренды