IDEAL INDUSTRIES NaviTEK II, Руководство пользователя

Страница: 16 / 46

151810 Iss 1 NaviTEK II
Page 16 User Guide
Enable Auto negotiate to allow NaviTEK II to change its settings automatically to suit
the connected network.
Disable Auto negotiate to fix the settings, and set speed (10Mb/s, 100Mb/s or 1Gb/s),
and mode to Full or Half Duplex.
Set minimum Rx size (19 to 99), used to detect Undersize frames in LINK STATS.
Set MDI to Auto to compensate for straight/crossover connections automatically.
Set MDI to MDI or MDIX to fix the MDI type for network troubleshooting.
1) The factory set MAC address of the tester is displayed for information only
and cannot be adjusted.
2) The current 802.1x setting is displayed (for setting see below).
Provides the information that follows on the SFP connected to the Optical port:
Status
– Available or Not Fitted, Vendor, Part number.
See
Supported SFP Transceivers below.
The current 802.1x setting is displayed (for setting see below).
Enable/disable 802.1x to suit your network configuration. With 802.1x disabled, the
tester will not be able to connect to any network which uses 802.1x security. With
802.1x enabled, the tester will not be able to connect to any network which does not
use 802.1x security.
Select the EAP method to suit your network configuration. Extensible Authentication
Protocol is an authentication framework. It can provide 802.1x authentication by a
number of different methods. NaviTEK II supports the six most common methods.
Select the method that suits your network. Select Any to allow NaviTEK II to attempt
each supported method in turn.
Select the Tunneled Method to suit your network.
Enter the Username and Password issued by your network administrator.
For step-by-step instructions on how to import 802.1x certificates and how to set the
EAP method and Tunneled method see
page 24 .
The SFP types that follow are supported. The use of other SFP types is possible but correct operation is
not guaranteed.
SX Avago AFBR-5705Z 1Gb/s Multimode 850nm LC Duplex
SX Apac LM28-C3S-TI-N-DD 1Gb/s Multimode 850nm LC Duplex
LX Avago AFCT-5705Z 1Gb/s Singlemode 1310nm LC Duplex
ZX Apac LS48-C3U-TC-N-DD 1Gb/s Singlemode 1550nm LC Duplex
www.vemco.pl