Ideal Heating i305, Установка и обслуживание

Страница: 53 / 56

HEAT INTERFACE UNIT COMMISSIONING CHECKLIST
This Commissioning Checklist is to be completed in full by the competent person who commissioned the boiler as a means of demonstra�ng
compliance with the appropriate Building Regula�ons and then handed to the customer to keep for future reference.
Failure to install and commission according to the manufacturer's instruc�ons and complete this Commissioning Checklist will invalidate the
warranty. This does not affect the customer's statutory rights.
Customer Name: Contact number:
Address:
POD HIU Model:
POD HIU Serial Number:
Heat Meter Serial Number:
Commissioned by (PRINT NAME):
Date:
Company Name:
Company Address:
CONTROLS (�ck the appropriate boxes)
Time and temperature control to hea�ng
Room thermostat and programmer/�me r Programmable room thermostat
Time and temperature control to hot water
Cylinder thermostat and programmer/�mer HIU intern controls
Hea�ng zone valves Fi�ed Not required
Hot water zone valves
Fi�ed Not required
Thermosta�c radiator valves Fi�ed Not required
Automa�c bypass to system
Fi�ed Not required
HIU interlock Fi�ed Not required
ALL SYSTEMS
The primary system has been flushed and cleaned in accordance with guidance in CIBSE CP 1.2 before connec�ng the HIU Yes
The domes�c hea�ng system has been flushed and cleaned in accordance with BS7593 and the HIU installa�on instruc�on s Yes
What domes�c hea�ng system cleaner was used?
What domes�c hea�ng system inhibitor was used? Quan�ty litres
Has a domes�c hea�ng system filter been installed? Yes No
CENTRAL HEATING MODE measure and record:
(for direct appliances record only primary flow / return in central hea�ng mode)
Primary differen�al pressure, between primary flow and return, during central hea�ng opera�on kPa
Primary flow rate m³/hr Primary opera�ng pressure bar
Primary flow temperature °C Primary return temperature °C
Central hea�ng flow temperature °C Central hea�ng return temperature °C
DOMESTIC HOT WATER MODE measure and record:
Is the installa�on in a hard water area (above 200ppm)? Yes No
If Yes above, and if required according to the installa�on manual, has a water scale reducer been fi�ed ? Yes No
What type of scale reducer has been fi�ed?
Primary differen�al pressure, between primary flow and return, during domes�c hot water opera�on kPa
Primary flow rate m³/hr Primary opera�ng pressure bar
Primary flow temperature °C Primary return temperature °C
Cold water inlet temperature °C Domes�c hot water temperature °C
Hot water has been checked at all outlets? Yes Domes�c hot water flow rate l/min
ALL INSTALLATIONS
The hea�ng and hot water systems comply with the appropriate Building Regula�ons
Yes
The HIU and associated products have been installed and commissioned in accordance with the manufacturer's instruc�ons Yes
The opera�on of the boilerand system controls have been demonstrated to and understood by the customer
Yes
The manufacturer's litertature, including Commissioning Checklist and Service Record, have been explained and le� with the customer Yes
Commissioing Engineer's Signature
Customers Signature
(To
confirm sa�sfactory demonstra�on and receipt of the manufacturer's literature)
6. COMMISSIONING