REPAIR MANUAL
REFRIGERATION UNIT
– ELECTRICS
Rev
. 21B
RM-Refrigeration Unit - electrics_EN
page 6 of 25
2.1.1 Special safety instructions for refrigerants
Applies to all commercially available CFC/FC refrigerants, CO
2
and cold brine, propane/isobutane.
The rating plate indicates the refrigerant used in the device.
AKE refers to all safety datasheets and safety instructions provided by the refrigerant
manufacturer and their regulations for safe handling of the refrigerant.
All safety instructions in the related operating manual for handling refrigerant
(Chapter 1.8
/ Chapter 1.9) must
be observed and understood.
2.2 Repair equipment / test equipment / material
2.2.1 Tool
➢
Screwdriver set (slotted/cross/TORX version)
➢
Allen key set
➢
Spanner set / socket wrench set
➢
Cordless screwdriver
➢
Metal drill set
➢
Multimeter (depending on the unit configuration)
➢
Cable cutting tool (side cutters, etc.)
➢
Insulation stripper
➢
Diagnostic device
2.2.2 Material
➢
Cable ties
➢
Adhesive tape / thermal tape
Only use original spare parts. Contact your service partner for more information. See
also see chapter 1.5 of the operating manual for the respective unit.
Special tools may be required in some circumstances, depending on the work/repair
effort. Contact the manufacturer or your service partner regarding this.