bl
LOCATION OF THE REMOTE CONTROL
Use the remote control within a distance of 8 meters/26 feet from the
appliance, pointing it towards the receiver. Reception is confirmed by a beep.
CAUTION
• The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote control to the
indoor unit.
• Prevent any liquid from falling into the remote control. Do not
expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly.
Use curtains to prevent the sunlight from falling on the receiver.
• If other electrical appliances react to the remote control, either
move these appliances or consult your local dealer.
• Do not drop the remote control. Handle with care.
• Do not place heavy objects on the remote control, or step on it.
CAUTION
• Do not mix old and new batteries or batteries of different types.
• Do not leave the batteries in the remote control if they are not
going to be used for 2 or 3 months.
• Do not dispose batteries as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
USING THE REMOTE CONTROL HOLDER
(OPTIONAL)
•
The remote control can be attached to a wall or pillar by using a
remote control holder (not supplied, purchased separately).
•
Before installing the remote control, check that the air conditioner
receives the signals properly.
• Install the remote control with two screws.
• For installing or removing the remote control, move it up or
down in the holder.
REPLACING BATTERIES
The following cases signify exhausted batteries. Replace old batteries with
new ones.
• Receiving beep is not emitted when a signal is transmitted.
• Indicator fades away.
The remote control is powered by two dry batteries (R03/LR03X2) housed in
the back rear part and protected by a cover.
1. Remove the cover in the rear part of the remote control.
2. Remove the old batteries and insert the new batteries, placing the (+)
and (-) ends correctly.
3. Install the cover back on.
8m
MOD
E
S W
ING
TEM
P
S HO
R TC
UT
FA
N
S PE
E D
TIM
E R
O
FF
RE
S ET
LO
C K
L
E D
FOL
L OW
ME
TIM
E R
ON
T
UR B
O
S EL
F CL
E AN
DIR
E CT
S LE
E P
FR E
S H
HANDLING THE REMOTE
CONTROL
NOTE:
When the batteries are removed, the remote control erases all
programming. After inserting new batteries, the remote control
must be reprogrammed.
