User Manual
- 8 -
1.2 REAR PANEL
1.2.1. POWER CONNECTOR
The
TEO
d9 has an internal power supply that will accept voltages ranging from 110V - 240V at frequencies from 50Hz-60Hz. An IEC
cord is included.
1.2.2. POWER SWITCH
The Power Switch turns the
TEO
d9 on and off. Note: we recommend that power amplifiers connected to the product should be
powered down prior to turning on the
TEO
d9.
1.2.3. ANALOG INPUTS
The analog input section of the
TEO
d9 offers 4 electronically balanced XLR connectors. The maximum input level is +23dBu max,
electronically balanced.
1.2.4. ETHERNET CONNECTOR
The RJ-45 connector is used to connect your product to a network. It can then be configured and controlled in real time with the PC
and MAC configuration program. With this program you can also update your DSP to the latest firmware. Please check our website
regularly for updates.
1.2.5. AES/EBU INPUT
The digital input of the
TEO
d9 offers an input channel on an electronically balanced XLR connector. The processor will accept AES/
EBU and S/PDIF input signals of 16 to 24 bit 44.1, 48, 88.2, or 96kHz.
1.2.6. ANALOG OUTPUTS
The output section of the
TEO
d9 offers 8 electronically balanced XLR connectors. The maximum output level is +12dBu, impedance
matched.
