ID View IV-100CD, Инструкция по установке и эксплуатации

Страница: 30 / 66

28
5.1 TIME/ DATE
This device is able to print inerasable system time and title information directly onto images during recording.
This page allows users to set the time and desired title, and to decide if the function is to be activated. The
entries are listed as follows.
TIME STAMP:
This option determines the system time to be stamped onto the images during recording.
ON: Enables the device to stamp the time onto images during recording.
OFF: Disables the stamping function.
TIME SETTING:
This entry allows users to set the system time to be stamped onto images.
TITLE STAMP:
This option determines a programmed title to be stamped onto images during recording.
ON: Enables the device to stamp programmed title onto images while recording.
OFF: Disables the stamping function.
TITLE SETTING:
This entry allows users to assign a title to be stamped onto the images.
NOTE: If you wish to have system-time on an archived image in a floppy, the “TIME STAMP” option
must be set to “ON” for recording.
NOTE: No matter whether the “TIME STAMP” option is set to “ON” or “OFF”, the unit will always
encode the system time into the video while recording. So you can always have system time to
be displayed on the screen by pressing the “ DISPLAY” button. However, if two time messages
have overlapped on the screen, please press the “DISPLAY” button to stop decoding time from
the video so that the unit will only display the stamped time only.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO TIME/ TITLE PAGE
TIME/TITLE
TIME
STAMP : OFF
TIME SETTING : SET
TITLE STAMP : OFF
TITLE SETTING : SET
MAIN PAGE
REC TIME STAMP