7
2.2
Rear
View
9
8
7
6
5
4
3
2
1
A
L
M
.O
U
T
G
N
D
A
L
M
.R
S
T
R
E
C
G
N
D
F
U
L
L
G
N
D
S
W
.O
U
T
A
L
M
.
IN
This device complies with
part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) This device may not cause
(2) this device must accept
may cause undesired operation.
harmful interference. And
any interference received,
including interference that
S-VIDEO
OUT
VIDEO
MUX MAIN
MONITOR
POWER
ON
OFF
AC
100
240V
IN
1
8
9
10
5
6
7
4
3
2
11
MUX MAIN MONITOR IN
Connector:
This BNC connector is used to connect the live video output from a multiplexer to the DVR.
VIDEO IN
Connector:
This BNC connector is used to connect the video output from a camera or a multiplexer to the DVR.
S-VIDEO IN
Connector:
This connector is used to connect the S-video output from a camera or a multiplexer to the DVR.
Terminal Block:
There are 9 exposure contacts on this terminal block including
SW. Out, GND, ALM. OUT, FULL,
REC, ALM RST, GND,
and
ALM. IN
for connecting with external devices. Please refer to the next
section for details.
Power Switch:
To power the unit on or off.
Plug Outlet:
For connecting with an external power supply.
RS-232
Port:
RS-232 communication port for connecting with an external control device. Please refer to
APPENDIX 1 for more details.
S-VIDEO OUT
Connector:
This provides the device’s S-video signal to a multiplexer.
VIDEO OUT
Connector:
This provides the unit’s composite video signal to a multiplexer.
MONITOR
Connector:
This provides the unit’s composite video or a multiplexer’s live signal if connected to a display device.
10 BASE-T
Connector:
This is a standard RJ-45 connector for 10 Mbps Ethernet networks.
NOTE: The DVR only processes the video signal from S-VIDEO IN connectors when receiving
video signals simultaneously from both “S-VIDEO IN
” and “VIDEO IN
”
connectors.
Содержание IV-100CD
Страница 2: ......