ID View IV-100CD, Инструкция по установке и эксплуатации

Страница: 17 / 66

15
PAL System (For using with single camera)
Possible Recording Time HDD=20 Gigabytes
High 3.5 hr 7 hr 14 hr 28 hr 56 hr 112 hr 196 hr 560 hr 840 hr 1120 hr
Standard 5.5 hr 11 hr 22 hr 44 hr 88 hr 176 hr 308 hr 880 hr 1320 hr 1760 hr
Image
Quality
Basic 7 hr 14 hr 28 hr 56 hr 112 hr 224 hr 392 hr 1120 hr 1680 hr 2240 hr
Refresh Rate (Field/Sec) 50 25 12.5 6.25 3.13 1.56 0.89 0.31 0.21 0.16
REC Time Mode 3 hr 6 hr 12 hr 24 hr 48 hr 96 hr 168 hr 480 hr 720 hr 960 hr
PAL System (For using with a multiplexer)
Possible Recording Time HDD=20 Gigabytes
High 3.5 hr 10.5hr 24.5hr 38.5hr 73.5hr 143.5hr 248.5hr 703.5hr 1053.5hr 1403.5hr
Standard 5.5 hr 15.8hr 36.8hr 57.8hr 110.3hr 215.3hr 372.8hr 1055.3hr 1580.3hr 2105.3hr
Image
Quality
Basic 7 hr 21.0hr 49.0hr 77.0hr 147.0hr 287.0hr 497.0hr 1407.0hr 2107.0hr 2807.0hr
Refresh Rate (Field/Sec)
(Figures on the setup menu)
50
(50)
16.7
(25)
7.14
(12.5)
4.55
(6.25)
2.38
(3.13)
1.22
(1.56)
0.70
(0.89)
0.25
(0.31)
0.17
(0.21)
0.12
(0.16)
REC Time Mode 3 hr 6 hr 12 hr 24 hr 48 hr 96 hr 168 hr 480 hr 720 hr 960 hr
NOTE: Recording times on the tables above are estimated. For actual available recording time
of a recording configuration, please refer to the system information of the DVR. (Please
refer to section 3.3 system information for more details.)
4.2 Recording Operations
This section details the way to record video into hard-disk drives. Before commencing with the recording
function, please configure the recording setting properly according to your needs.
4.2.1 Manual Recording
When the DVR is in live display mode, take the following steps to start recording:
(1) In live display, press the REC button to record video into a hard disk drive with the
corresponding programmed recording settings. The monitor should display a flashing REC
message and the REC button will light up indicating the DVR is in the recording status.
(2) Press the STOP button to stop recording any time.
(3) To access just recorded video, please refer to section 4.4 for more details.