ID Tech MiniSmart II, Справочник по командам

Страница: 6 / 68

MiniSmart II
5
Commands
The following table lists the commands supported by the device, in alphabetical order (by
command name). Documentation of individual commands begins after the table.
Command Summary Table (Alphabetical by Command Name)
Command Name
72 46 05 02 Authenticate Transaction
72 46 06 Cancel Transaction
72 46 05 03 Complete Transaction
7F 53 00 Default All
72 53 00 Default ICC Group All Settings
70 53 00 Default RS232 Group
78 46 F5 Device Enter into Load Important Data State
78 46 7A 49 52 46 57 00
00 00 00 00 00 00 00
Enter into Bootloader
78 46 F4 Erase Keys
78 46 C3 49 44 54 45 43
48
Erase Serial Number
72 46 41 Exchange APDU Plaintext
72 52 01 21 Get Ascii Mask Data
70 52 01 41 Get Baud Rate
72 52 01 22 Get BCD Mask Data
78 46 11 Get Bootloader FW Release Version (Internal Command)
72 52 01 04 Get Card Type Option
70 52 01 42 Get Data Bits
78 52 01 50 Get Date and Time
78 46 3E Get DUKPT Key KSN
72 46 23 01 Get EMV Level One Version Number
72 46 08 01 Get EMV Level Two Version Number
72 52 01 02 Get Encryption Mode for Data encryption Key (ICC
DUKPT Key)
78 46 01 Get Firmware Release Version
72 52 01 05 Get ICC L1 Transaction Timeout
72 46 09 13 Get ICC L2 AID List Check Value
72 46 09 14 Get ICC L2 CA Public Key Check Value
72 46 09 02 Get ICC L2 Configuration Check Value
72 46 09 01 Get ICC L2 Kernel Check Value
72 46 24 Get ICC Reader Status
72 52 01 03 Get ICC Voltage Option(Internal Command)
72 46 86 01 Get Interface Device Serial Number
72 46 23 02 Get Internal EMV Level One Version Number