Seite 16 von 17
ICU tech GmbH | Bahnhofstrasse 2 | CH-3534 Signau
T: +41 34 497 28 20
hone:
+41
34
49720info@icutech.
www.icutech.ch
5.9
Sensor View
The sensor view is opened by clicking on a desired sensor. In this view, detailed information about
the sensor is displayed. The measured value diagram and the course of events for the selected
period are displayed.
Below the diagram, the sensor ID, measuring interval, calibration value and time, alarm filter and
sensor description are displayed.
5.9.1
Zooming the Diagram View
To zoom, use the mouse to mark the desired zoom area from top left to bottom right. To reset the
zoom area, mark the selection with the mouse from bottom right to top left.
Zoom:
Reset:
Name des ausgewählten Sensors
Rückwärts/Vorwärts mit der Zeitachse
Sensortabelle
Y-Achse: Wert des Sensors
X-Achse: Datum und Zeit des Sensors
Kurve des Sensors
