Config Example: Enable Dual LED Mode
By default, ICT card readers operate in single LED mode (when wired in Wiegand configuration). To enable dual
LED mode you need to change the reader programming.
Dual LED mode requires the reader to be wired with both the orange and brown LED control lines connected.
1.
Log in to the Protege Config App, using your app account.
2.
Select your
Credential Profile
.
3.
Add
a new
Reader Configuration
called
Dual LED Mode
.
4.
Tap the
Add TLV
dropdown and select the
LED Mode
option.
5.
Set the
LED Mode
to
Dual
, then tap
Save
.
You can now apply the configuration to the required reader(s). Power cycle the reader and select and apply your
new
Dual LED Mode
config within two minutes of startup.
Config Example: LED Colors
The following programming example demonstrates how to create a config that changes the LED colors displayed
by card reader to indicate when a door is locked or unlocked.
1.
In the Config App, navigate to the
Reader Configuration
page and select the appropriate
Credential Profile
.
2.
Tap the
+
icon (top right) to create a new config. Give the config a
Name
.
3.
Tap
Add TLV
to open the dropdown.
4.
Select
LED Color Setting
and tap
OK
.
5.
Tap on the
Color
field to display color details. Select a color by tapping or dragging on the color picker.
Alternatively, you can type a color code into the field below the color picker. Tap the
arrow
icons to switch
between Hex, RGB and HSL color codes.
Note that the color displayed by the reader LEDs will not perfectly match the screen of your device.
6.
Tap on the
Index
field to enter an index number. Each index corresponds to a particular function of the card
reader. In this case, select
5
, which represents the
Door Unlocked
function.
7.
Tap
Save
.
8.
Add
another TLV with the
LED Color Setting
option. Select another color as required.
9.
Set the
Index
to
11
, corresponding to the
Door Locked
function. Tap
Save
.
10.
Tap
Save
again to save the config.
You can now apply the configuration to the required reader(s). Power cycle the reader and select and apply your
new LED configurations within two minutes of startup.
ICT Card Reader | Configuration Guide
25
Содержание Protege
Страница 1: ...ICT Card Reader Configuration Guide...
