ICT Protege EliteSuite, Руководство пользователя

Страница: 15 / 20

ELT-KLED Protege EliteSuite Icon LED Keypad | November 2013
15
Messages
The EliteSuite system message handling capabilities to allow communication with a property or facility
manager. A new message that has been sent to your system is announced by an audible tone and the
MESSAGE LED being lit.
1. To clear the Message LED, log in to the Setup menu and press [MENU], [2], [ENTER]
2. To choose another menu option press the [MENU] key, or to exit press the [CLEAR] key
Panic Alarm
The EliteSuite system can provide three panic alarms that immediately generate an alarm after simultaneously
pressing and holding two specific buttons for three seconds. Based on your needs, these panic alarms can
generate audible alarms (sirens or bells) or silent alarms and can communicate specific messages to your
monitoring station or property manager.

Press and hold keys [1] and [3] for the panic alarm.

Press and hold keys [4] and [6] for a medical alarm.

Press and hold keys [7] and [9] for a fire alarm.
i
All Panic Alarm activations must be enabled by your property manager or installation company.
Fire Alarm
When a fire alarm occurs, the EliteSuite will emit three audible tones at 2 second intervals until reset by entering
a valid user code. If the zone is a delay fire zone, there is a delay of thirty seconds before the system contacts
the security company or property manager.
A delayed fire zone will prevent unnecessary reporting of false alarms allowing you to reset the fire alarm before
a report is sent. If there is no fire condition, contact your property manager or security company immediately to
avoid an unnecessary response.
A delayed fire zone will automatically cancel if the smoke detector is reset within 30 seconds. Pressing any key
on the keypad during the first 30 seconds will silence the alarm for 90 seconds.
i
Fire Alarm functions must be enabled by your property manager or installation company.