ICT Protege ACC-ATH1, Руководство по установке, Страница: 30 / 38

30
PRT-ATH1 / ACC-ATH1 Protege Temperature and Humidity Sensor Installation Manual | April 2011
Step 5
The Outputs Menu is shown below. Use this menu to assign a sensor to an output. Each output is shown next to
it’s currently assigned sensor (if any).
Select the desired output and assign a sensor to it, as shown below in
figure 18 and 19.Note that the Analog outputs can be either voltage or current but not both. E.g. attempting to
set Analog1 (0-10V) to External Temperature will automatically result in Analog1 (4-20mA) switching to
Unassigned.
Editing the Output Settings
Editing the Output Settings