ICT Protege ACC-ATH1 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 38

ICT Protege ACC-ATH1 Скачать руководство пользователя страница 2

2

PRT-ATH1 / ACC-ATH1

Protege Temperature and Humidity Sensor

Installation Manual | April 2011

The specifications and descriptions of products and services contained in this manual were correct at the time of
printing. Integrated Control Technology Limited reserves the right to change specifications or withdraw products
without notice. No part of this document may be reproduced, photocopied, or transmitted in any form or by any
means (electronic or mechanical), for any purpose, without the express written permission of Integrated Control
Technology Limited. Designed and manufactured by Integrated Control Technology Limited. Protege® and the
Protege® Logo are registered trademarks of Integrated Control Technology Limited. All other brand or product
names are trademarks or registered trademarks of their respective holders.

Copyright © Integrated Control Technology Limited 2003-2011. All rights reserved.

Publication Date: April 2011

«
1
2
3
4
...
»

Содержание Protege ACC-ATH1







































Отзывы:

Нет отзывов