ICT ISOLATED 2 Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 48

ICT ISOLATED 2 Series Скачать руководство пользователя страница 26

Innovative Circuit Technology Ltd.

26

Follow these steps to access the Digital Series embedded Web
server from a browser. The recommended web browsers to use with
this power supply are Microsoft Internet Explorer, Mozilla Firefox or
Google Chrome.

1.

Start your Web browser.

2.

Enter the IP address of the power supply in the location/address
field of the browser.

If the power supply is connected to a network with a DHCP server,
the power supply will be assigned an IP address automatically. The
current IP address of the power supply can be found on the Network
Status screen on the front panel (see the Control Panel Menus
section for more information). If the power supply is not connected to
a network with DHCP, it will use a default IP address of

192.168.0.181.

You can also find the IP address of any ICT unit connected to a
network by running the ICT IP Address Discovery Utility app on any
Windows based computer connected to the same network. This tool
is available for download on the ICT Website:

http://www.ict-power.com/tools-utilities/

3.

Enter your user name and password. The default Administrator
user name is admin, and there is no password by default.

«
...
24
25
26
27
28
...
»

Содержание ISOLATED 2 Series

















































Отзывы:

Нет отзывов