DEVICE POWER SUPPLY AND CONNECTION TO THE LED MODULE
POWER SUPPLY CONNECTION DIAGRAM AND LED 2AMDI511VPVRDBS - FIGURE N. 1
The 2AMDI511VPVRDBS dimmer has to be powered according to the polarity showed in FIG. 1
through the DC IN (+ and -) terminals.
In case the power supply polarity is inverted no damage will be caused to the device .
The LED (LED PWR) positioned on the circuit board indicates the presence of power supply.
The LED (LED DIM) shows the dimming level of the output.
The LED load connection has to be made by using the OUT (L+ and L-) terminals.
5
IOTLIGHT - User Manual 2AMDI511VPVRDBS