![background image](http://html1.mh-extra.com/html/ics/wincomm4/wincomm4_product-manual_3531735007.webp)
Manual Number: 00750-004-14
Page 1-1
Chapter 1: Installation
The WINCOMM4 board can be installed in any of the PC expansion slots, except J8 on the original
IBM XT and portable. Be sure to set the address and jumper options before installation. Remove
the PC case, remove the blank metal slot cover, and insert the board. Replace the screw, replace the
cover, install the “spider cable” to the DB-37 connector mounted on the board (see
Figure 1-1
) and
you are done.