5. Setting up the device
12
5.4.2. General device parameters
Menu level
Parameterisation level
Display time,
Default:
The display is set up with
[
▲
] [
▼
]
. Thereby it switches until 1 second in
increments of 0.1 seconds and until 10.0 seconds in increments of 1.0. With
[P]
the selection is confirmed and the device changes into menu level.
Rounding of display values,
Default:
This function is for instable display values, where the display value is changed in
increments of 1, 5, 10 or 50. This does not affect the resolution of the optional
outputs. With
[P]
the selection is confirmed and the device changes into menu
level.
Display,
Default:
With this function the current measuring value, the min/max-value or the process-
controlled hold-value can be allocated to the display. With
[P]
the selection is
confirmed and the device changes into menu level.
Brightness control,
:
Default:
The brightness of the display can be adjusted in 16 levels from 00 = very dark to
15 = very bright via this parameter or alternatively via the navigation keys from
the outside. During the start of the device the level that is deposited under this
parameter will always be used, even though the brightness has been changed
via the navigation keys in the meantime.
Menu group level
Menu level
then