Installation
(mm)
96
96
13,2
47,3
91,5
7
67
92
92
Intended use
The PEM353 is suitable for use in 2-, 3- and 4-wire sys-
tems and in their respective versions as TN, TT and IT sys-
tems. The current measurement inputs of the PEM353 are
always connected via external …/1A or …/5A measuring
current transformers. In principle, measurements in medi-
um and high-voltage systems are carried out via voltage
transformers. Use for the intended purpose also includes:
• Device-specific settings compliant with local equip-
ment and operating conditions
• Adhering to the manual
Any other use than that described in this manual is regar-
ded as improper.
PEM353 - Universal measuring device
i
Part of the device documentation in addition to
this quickstart is the enclosed “Safety instructions
for Bender products“ and the manual, downloada-
ble at https://www.bender.de/en/service-support/
download area. The quickstart guide does not re-
place the manual.
Quickstart guide for the following devices
Type
Art.-No.
PEM353
B93100355
PEM353-P
B93100354
PEM353-N
B93100353
Mounting in a front panel
Mounting opening 92 mm x 92 mm (max. 92.8 x 92.8 mm).
1. Mount the rubber seal on the back of the device.
2. Insert the device into the mounting opening of the
front panel.
3. Place the four retaining clips over the device corners
from behind.
4. Push the retaining clips tightly against the front plate.
5. Check the device to ensure that it is firmly installed.
The device is installed.
Safety instructions
I
R
isk
of fatal injury due to electric shock!
Touching
live parts of the system carries the risk of an electric
shock, damage to the electrical installation or de-
struction of the device.
Before installing and con-
necting the device, make sure
that the installati-
on has been
de-energised
. Observe the rules for
working on electrical installations.
Refer to the ra-
ted and supply voltage values
as specified in the
technical data!
Scope of delivery
PEM353, rubber seal, 4 x retaining clips, safety instructi-
ons for Bender products, quickstart guide
PEM353_D00335_01_XXEN / 09.2022
Quickstart guide EN
Quickstart guide
