© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
54
15.5 Install Ignition coil.
A Place ignition coil shim (0.012”)
on magnet counterweight side
of flywheel.
B Set ignition coil in place.
C Install ignition coil screws, wave
washers, and plain washers with
Loctite
®
242.
Holding shim, rotate flywheel magnet
around to coil.
E Torque ignition coil screws to
26 in-lbs. (2.93 Nm).
F Remove shim, rotate flywheel to
check clearance.
15.6 Install flywheel shroud.
15.7 Route yellow ignition stop switch wire
through crankcase into carburetor
chamber.
15.8 Complete ignition wire routing.
15. IGNITION COIL