© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
43
13
This section covers the
disassembly, inspection and
assembly of the cylinder, piston
and related components.
Removal of several component
groups is required. Refer to
sections 5, 6, 10, and 12
if necessary.
13.1 Remove carburetor base screws (3).
A Remove carburetor base bracket
from rear manifold.
B Remove carburetor base bracket
from pulse tube.
13.2 Remove pulse tube and protective
spring from cylinder base.
NOTE
:
When replacing the
660GC
cylinder
and piston it is necessary to tune the
carburetor prior to returning the saw to
service (see section 22).
13. CYLINDER & PISTON
