© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
29
8. STARTER
8.10 Inspect pulley spring catch.
A Clean with cleaning solution.
B Replace if worn or broken.
8.11 Install starter rope and tie knot.
8.12 Knot tying instructions:
A Make a loop at the end of the
pulley rope with the end of the rope
crossing on top of the tail.
B Bring the end of the rope through the
loop, creating a single loose knot.
C Pull the end of the rope down and in
front of the tail.
D Send the end through the loop a
second time, creating a double knot;
cinch tight.
A
B
C
D
