The Local Extender
The Local Extender connects to the computer using a standard USB 3.1 Gen 1 cable. Power for this unit is provided by
the included 24V 1A adapter.
ITEM TYPE
DESCRIPTION
1
Power LED
LED is SOLID ON when DC is supplied to the extender unit. LED is OFF when no
power is supplied by the AC Adapter.
2
Mode
Reserved for manufacturer use.
3
Config
Reserved for manufacturer use.
4
Status LED
LED is SOLID ON when system is functioning normally. LED BLINKS when system is
booting
OR
to indicate a temperature warning in unison with the LINK, USB 2, and
USB 3 LEDs.
5
Link LED
LED is SOLID ON when Local Extender is linked to an opposite Remote Extender.
LED is OFF when there is no connection between the Local and Remote Extenders.
6
USB 2 LED
LED is SOLID ON when an active USB 2 connection is established through the
extender system. LED BLINKS when the USB 2 connection is suspended/asleep.
LED is OFF when no USB 2 connection is detected.
7
USB 3 LED
LED is SOLID ON when an active USB 3 connection is established through the
extender system. LED BLINKS when the USB 3 connection is suspended/asleep.
LED is OFF when no USB 3 connection is detected.
8
LAN Port
(100/1000 Mbps)
Ethernet pass through channel connects to a network or Ethernet device.
9
Link Port (RJ45)
Accepts RJ45 connector for CAT 6a/7 cabling to connect the Local Extender to the
Remote Extender.
10
USB Host Port
USB 3 Type B receptacle used to connect Local Extender to USB 3 Host computer.
11
DC Power Port
Locking connector for the included power adapter – accepts 24VDC 1A.
4
Front View
Rear View
Config
USB 2 USB 3
Mode
Power
Link
Status
3
1
2
4
5
6
7
LAN
24V 1A
USB
Link
8
9
10
11
