background image

Thank you for purchasing the USB 3-2-1 Raven™ 3104. 

Please read this guide thoroughly.

This document applies to the following part numbers: 

Model

North 

American

System 

European

System

United  

Kingdom

System

Australia

System

Japan

System

USB 3-2-1 Raven 3104

01-00637  01-00638

01-00639

01-00640

01-00641

FCC Radio Frequency Interference Statement Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and (2) this device must accept any interference received 

including interference that may cause undesired operation.

CE Statement

We, Icron Technologies Corporation, declare under our sole responsibility that the USB 3-2-1 Raven™ 3104, to 

which this declaration relates, is in conformity with European Standards EN 55022, EN 55024, EN 55032 and 

EN 61000.  

IC Statement

This Class B digital apparatus complies with Canadian ICES-003 Issue 6.

WEEE Statement 

The European Union has established regulations for the collection and recycling of all waste electrical 

and electronic equipment (WEEE). Implementation of WEEE regulations may vary slightly by individual EU 

member states. Please check with your local and state government guidelines for safe disposal and recycling 

or contact your national WEEE recycling agency for more information.

Product Operation and Storage

Please read and follow all instructions provided with this product, and operate for intended use only. 

Do not attempt to open the product casing as this may cause damage and will void warranty. Use only the 

power supply provided with this product (if applicable). When not in use, product should be stored in a dry 

location between -20°C and 70°C. 

©2018 All rights reserved. 

Document #90-01631-A01

Содержание USB 3-2-1 Raven 3104



















Отзывы: