Page 2 www.icron.com Icron Systems Inc
Thank you for purchasing the USB Ranger. Please read this guide
thoroughly before installation.
This document applies to Part Numbers: 00-00003, 00-00004, 00-00007,
00-00011, 00-0013, 00-00014, 00-00015, and 00-00016.
FCC Radio Frequency Interference Statement Warning
The USB Ranger has been tested and found compliant with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when installed and operated in a commercial environment. The USB
Ranger generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user guide, may cause harmful
interference to radio communications. Operation of the USB Ranger in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CE Statement
We, Icron Systems Inc., declare under our sole responsibility that the USB
Ranger, to which this declaration relates, is in conformity with European
Standard EN 55022/A1 Class A, and EN 50082 -1 (IEC 801-2, IEC 801-3,
IEC 801-4).
IC Statement
This Class A digital apparatus complies with Canadian ICES -003.
©2000 Icron Systems Inc. All rights reserved. Icron Systems Inc., the Icron
Systems Inc. logo, and the Icron Systems Inc. products referred to herein
are either the trademarks or the registered trademarks of Icron Systems Inc.
All other trademarks are property of their respective owners. Icron Systems
Inc. assumes no responsibility for errors that may appear in this manual.
Information contained herein is subject to change without notice.
Icron Systems Inc www.icron.com Page 15
Obtaining Warranty Service
To obtain warranty service, you must contact Icron Systems Inc. within the
warranty period for a Return Material Authorization (RMA) number.
Package the product appropriately for safe shipment and mark the RMA
number on the outside of the package. The package must be sent prepaid to
Icron Systems Inc. We recommend that you insure it or send it by a method
that provides for tracking of the package. The repaired or replaced item will
be shipped to you, at Icron System Inc.’s expense, not later than thirty days
after Icron receives the defective product.
Address the returned product to:
RMA Coordinator
Icron Systems Inc.
4603 Kingsway, Suite 301
Burnaby BC Canada V5H 4M4
(604) 638-3920
