ICRealtime IPFX-S20F-W1, Быстрый старт

Страница: 4 / 17

14

Do not provide two or more power supply sources for the device; otherwise it might damage
the device.
Disclaimer

This manual is for reference only. Please refer to the actual product for more details.

Minor differences might be found in user interface, and there might be deviation between the
actual value of some data and the value provided in the manual due to the reasons such as
the real environment is not stable. Please refer to the final explanation of the company if
there is any doubt or dispute.

All the designs and software are subject to change without prior written notice. The manual
will be regularly updated according to the product upgrade without prior announcement.

Please contact the supplier or customer service if there is any problem occurred when using
the device.

Please contact the customer service for the latest procedure and supplementary
documentation.

Please visit our website or contact your local service engineer for more information.

The company is not liable for any loss caused by the operation that does not comply with the
manual.

If there is any uncertainty or controversy, please refer to our final explanation.
Regulatory Information
FCC Information
1.1 FCC conditions
：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

This device may not cause harmful interference

This device must accept any interference received, including interference that may cause
undesired operation.
1.2 FCC compliance
：
This equipment has been tested and found to comply with the limits for a digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference. This equipment generate, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.