14
Figure 2-2
1) Take out mounting bracket from the packing box (with mounting foam), tear
off the foam membrane and stick it on the mounting surface.
2) Put the front lens into the mounting bracket and then lock the self-tapping
screw firmly.
3) Tighten the rotation ring firmly.
Mode 2
Note
It needs to implement the following steps when it is model D.
Figure 2-3
1) Take out mounting bracket from the accessories bag (including adjusting
screw, rotation fixing ring, pedestal and inner barrel).
2) Put the round lens into the inner barrel properly.
3) Twist the rotation fixing ring into the inner barrel and make sure the round
lens is firmly fixed.
4) Rotate the lens to a proper angle, lock the adjusting screw firmly.
5) Use three self-tapping screws to fix the pedestal on the mounting surface.
